![background image](http://html.mh-extra.com/html/nec/mdview-232/mdview-232_manual_248465023.webp)
Performance
Third Party Equipment
Use only batteries, chargers, and authentic accessories approved by NEC. Modifications, the use of third party equipment, cables, or accessories that are not made or
AUTHORIZED by NEC may invalidate any approval or warranty of your phone, may adversely affect the phone’s operation, and may be dangerous. For availability of
approved accessories, check with your wireless phone dealer.
Service
The wireless phone, batteries and charger do not contain user-serviceable parts. We recommend that your NEC wireless phone be serviced or repaired by an NEC
AUTHORIZED service center. Please contact your Service Provider or NEC at 1-800-637-5917 if you believe that you require service. Any unauthorized service may invalidate
the warranty of your wireless phone.
Efficient Use
For optimum performance with minimum power consumption, hold your NEC 232 wireless phone (with the flip open) as you would any other phone and speak directly into
the mouthpiece.
Battery
The NEC 232 phone contains an 700 mAh, standard Lithium-ion battery. Battery performance depends upon signal strength, network configuration, phone features
selected, battery age and condition, battery charging habits, temperatures to which battery is exposed, and many similar factors. (See flag.)
Antenna
Your phone has an internal antenna located at the base of the phone below the keypad. As with any other
radio transmitting device, avoid touching the antenna area when the phone is turned On to optimize the
antenna performance and talk time of the phone. Contact with the antenna area may affect call quality and
may cause the phone to operate at a higher power level than otherwise needed.
O
Look for the NEC Authentic Accessories
TM
logo
to know if the item has been approved by NEC
for use with the NEC 232.
I
Not using NEC Authentic Accessories
TM
or not
using NEC approved accessories may void your
phone’s warranty.
O
Your 232 battery maintains an
“over-discharge protection” that turns the
battery off when the voltage falls below 2.4V.
If this voltage drop occurs, the battery will
require a longer charge period (the duration
depends upon the extent of “over-discharge”,
though typically 5 to 15 minutes longer than
the standard charge time). During this
particular charge period, the Charging LED
will not illuminate.
O
The mouthpiece is licated in the same area as
the antenna.
15
Summary of Contents for MDview 232
