![background image](http://html.mh-extra.com/html/nec/mdview-232/mdview-232_manual_248465029.webp)
Powering-On the Phone
Turning the Phone On
*
Press and
HOLD
(On-Off) to turn On the phone.
After the powering On process, the phone displays the Idle screen.
You may need to input your PIN code or phone security code (refer to page 17).
Turning the Phone Off
*
Press and
HOLD
(On-Off) until it powers down. The power down screen displays the power-down graphic and the phone powers Off.
After powering Off or turning the wireless phone Off, you must wait three seconds before powering On.
Language Display
If the display is showing any language other than your own, proceed as follows:
*
Press
MENU
(Main) to display the Main Menu. Press
1, 1,
and
8
to display the Language screen. (See Flag.)
Press the appropriate key to select the required language and return to the Phone menu.
Press
(End) to return to the Idle screen.
Frequency Bands
The type of frequency band that you use depends upon your location. (See Flag.)
*
Press
MENU
(Main)
, 1, 5,
and
4
to display Band Priority screen.
Press
1
to select the 850/1900 frequency band if you are located in the United States or press
2
to select the 1800 frequency band if you are located in Europe and
other locations. The selected setting is saved and the display returns to the Network menu.
O
Do not remove the battery to turn your phone
Off as this may cause loss of stored
information.
O
The phone supports the above languages and
the keyboard symbols have been chosen for
world-wide operation.
O
Frequency bands need to be changed for the
wireless phone to work properly when
travelling outside the United States.
21
Summary of Contents for MDview 232
