I-Select TS100 / I-Select TW100 User Guide - System Overview
1 - 11
PCI -E x1 Slots
The motherboard has two PCI-E x1 expansion slot that you can use to add a LAN
board.
Network Controller
Note:
To ensure EMC product regulation compliance, the
system must be used with a shielded LAN cable.
The nVidia chipset on the motherboard supports 1GB channel LAN.
ACPI
The motherboard supports the Advanced Configuration and Power Interface (ACPI) as
defined by the ACPI 2.0 specifications. An ACPI aware operating system can put the
system into a state where the hard drives spin down, the system fans stop, and all
processing is halted. However, the power supply will still be on and the processors will
still be dissipating some power, so the power supply fans will still run.
The system board supports sleep states s0, s1, s4, and s5:
■
s0: Normal running state.
■
s1: Processor sleep state. No context will be lost in this state and the processor
caches will maintain coherency.
■
s3: Suspend to RAM: Your working environment is saved to RAM.
Keyboard and Mouse
The keyboard/mouse controller is PS/2-compatible.
Peripheral Bays
Your system features four 5.25-inch bays that you can use with either a hard disk drive,
an optical device such as a DVD-ROM, a COMBO DVD-ROM CD-RW, a DVD+R9
(DL) or a tape backup unit. You can also use two of these bays to install an optional
hot-swap SCSI hard disk drive bay or an optional hot-swap S-ATA hard disk drive bay.
See “Optional Features” on page 1-12.
