I-Select TS100 / I-Select TW100 User Guide - Configuring Your System
3 - 3
BIOS Setup Utility
The BIOS Setup Utility is used to change system configuration parameters. The utility
is resident in the system FLASH memory and does not require a diskette or an operat-
ing system present to run.
Using the BIOS Setup Utility
You access the BIOS Setup utility when you turn on or reboot your system. To run the
BIOS Setup Utility, perform the following procedure:
1.
Power-on or reboot the system. “Press <DEL> to enter SETUP” displays.
2.
Press
DEL
. The BIOS Setup Utility starts and the Main Menu is displayed. The
Main Menu lists the following selections:
Use the arrow keys to select a menu or an item on a displayed menu. Press the value
keys (listed in the table below) to cycle through the allowable values for the selected
field. Use the “Save & Exit Setup” item to save the current values on all the menus.
To display a submenu, position the cursor on a selection that has a submenu and press
ENTER
. An arrow precedes selections with submenus.
Refer to the following table for information on the keys that you use with BIOS Setup.
These keys are also listed at the bottom of the Setup menu.
Table 3 - 1: Main Menu
Display
Use
Standard CMOS Features
Use this menu for basic system configuration.
Advanced
Use this menu for setting the Advanced Features available on your system.
Integrated Peripherals
Use this menu for setting onboard IO, IRQ, DMA assignment.
Power Management Setup
Use this menu for setting your system’s power management.
PnP/PCI Configurations
Use this menu to configure server specific options.
PC Health Status
Use this menu to display server information.
MB Intelligent Tweaker (M.I.T.) Use this menu to change CPU’s clock and voltage
Load Optimized Defaults
Press
Enter
to load factory default values.
Set Supervisor Password
Press
Enter
to set a supervisor password.
Set User Password
Press
Enter
to set a user password.
Save & Exit Setup
Press
Enter
to save and exit the BIOS Setup utility
Exit Without Saving
Press
Enter
to exit without saving changes.
Table 3 - 2: BIOS Setup Keys
Key
Function in Setup Menu
F1
Get Help about an item.
ESC
Exit the current menu and return to the previous menu.
Left or right arrow keys
Move between menus.
Up or down arrow keys
Move cursor up and down. The cursor moves only to the settings
that you can change.
