I-Select TS100 / I-Select TW100 User Guide - Upgrading Your System
4 - 4
Removing or Installing the Right Side Door
The right side door provides access to the disk drive bays, to the motherboard and to
the 5.25 and 3.5-inch bays.
Removing the Right Side Door
1.
Make sure the power switches for the computer, video monitor and any periph-
eral devices are turned OFF and unplug the power cord (see the 'Safety Precau-
tions' chapter).
2.
Disconnect the monitor and peripheral devices (printers, for instance) from the
system.
3.
Unlock the key lock.
Figure 4 - 1 : Key lock
4.
Lift the release latch on the back of your system as shown in the picture below.
Figure 4 - 2 : Right Side Door Release Latch
5.
Carefully slide the right side door about two centimetres towards the back of the
unit. Please note that you may find this procedure easier to follow if you lay the
unit on the left side.
6.
Lift the right side door away from the computer
