I-Select TS100 / I-Select TW100 User Guide - Setting Up Your System
2 - 10
3.
Install the rack mounting frame
(A)
on the server
(B)
as shown in figure 4
below.
Figure 2 - 4 : Installing the rack mounting frame on the server
4.
Slide the rack mounting frame on the server until the front of the server
protrude a little from the frame.
5.
Replace the front panel.
6.
Replace the right side door.
7.
Align the rack mounting frame
(A in figure 5)
with the rear of the front panel
(B
in figure 5)
.
8.
Secure the frame with the grubscrews
(C in figure 5, four on each side)
using
the hex key
(C in figure 1)
, enough to fix the frame to the server but not too
much to prevent damage to the server case.
Figure 2 - 5 : Securing the rack mounting frame
