![background image](http://html.mh-extra.com/html/nec/hx4000/hx4000_user-manual_251339091.webp)
5-2
Upgrades and Options
Caution: Electrostatic discharge (ESD) and ESD
protection.
ESD can damage disk drives, boards, and
other parts. This system can withstand normal levels of
environmental ESD while you are hot-swapping SCSI
hard drives or hot-swapping a failed fan module or
power supply. However, we recommend that you do all
procedures in this chapter only at an ESD workstation.
If one is not available, provide some ESD protection by
wearing an antistatic wrist strap attached to chassis
ground
any unpainted metal surface
on your system
when handling parts.
Caution: ESD and handling boards. Always handle
boards carefully. They can be extremely sensitive to
ESD. Hold boards only by their edges. After removing a
board from its protective wrapper or from the system,
place it component-side up on a grounded, static-free
surface. Use a conductive foam pad if available but not
the board wrapper. Do not slide board over any surface.
Caution: Internal support panel, proper cooling
and airflow. To prevent damage to the system board
from partially inserted processor and memory boards
and to provide proper cooling and airflow, always
install the internal support panel for the processor and
memory boards before installing the chassis side and
top covers and turning on the system. Operating the
system without this support panel in place can damage
system parts.
Summary of Contents for HX4000
