![background image](http://html.mh-extra.com/html/nec/hx4000/hx4000_user-manual_251339132.webp)
5-43
Upgrades and Options
8.
Remove the new drive from its protective wrapper,
and place on an antistatic surface.
9.
Record the drive model and serial numbers in the
equipment log.
10.
Position the drive so its SCA connector is near the
top surface of the drive. Place drive on the antistatic
surface again.
11.
Slide the drive into the carrier with its SCA
connector facing toward the open end of the carrier if
swapping drives (reuse the carrier from the faulty
drive). Otherwise, the carrier's shipping bracket
must be removed before installing the drive into the
carrier (see Figure 5-17). To remove the shipping
bracket remove the two screws securing it to the
carrier and remove the shipping bracket.
12.
While holding the drive in the carrier with your left
hand, align the drive’s screw holes with the carrier’s
screw holes and insert the four screws of appropriate
size and length (see Figure 5-18).
13.
Align drive/carrier assembly so it engages the guide
rails in the bay.
14.
Gently push the assembly into the bay until the drive
docks with the backplane connector and locks in
place.
Figure 5-17. Removing the Carrier’s Shipping Bracket
A
B
C
Removing the carrier’s
shipping bracket
A Carrier
B Two screws
C Shipping bracket
Summary of Contents for HX4000
