NEC Express5800/T120h User Manual Download

Page: 145 / 210

1. Installing Internal Optional Devices

Express5800/T120h User’s Guide

145

Chapter 2 Preparations

Installing a SAS or SATA Drive

Install a hard disk drive by using the following procedure.

Note

In the RAID System, use hard disk drives that have the same specifications

(capacity, rotational speed, and standard) for each Disk Array.

See Chapter 2 (1.2 Overview of Installation and Removal) for preparations.

Locate the slot where you install the hard disk drive.

Install hard disk drives in ascending order of slot number.

Remove the dummy tray.

Dummy trays are installed in every slot.

Note

Keep the removed dummy trays for future use.

Prepare the drive.

Unlock the handle of the tray.

2.5-inch drive

3.5-inch drive

Summary of Contents for Express5800/T120h



















































































































































































































Search results

Summary of Contents for Express5800/T120h

Reviews:

Related manuals for Express5800/T120h

Brands by name

Popular brands

NEC Express5800/T120h, User Manual

Search results

Summary of Contents for Express5800/T120h

Reviews:

Related manuals for Express5800/T120h

Brands by name

Popular brands