NEC ELECTRA ELITE IPK II, General Description Manual

Page: 28 / 174

Document Revision 1 Electra Elite IPK II
1 - 4 Introduction
J Electra Elite IPK Terminals
The Electra Elite IPK Terminals (DTH/ITH telephones) offer a variety of
colors, display and non-display and line sizes:
Terminals are available in black or white.
Two terminal types: with LCD and without LCD. The large Liquid
Crystal Display (LCD) on the display terminals provides call status data
and programming information.
Line sizes include: 8-line, 16-line and 32-line.
Two IP terminals are available in 8-line and 16-line (both with LCD).
Speakerphones with full handsfree operation and headset jacks are
standard.
All are compatible with the AD(A)-R, AP(A)-R, AP(R)-R, CT(A)-R Unit
and CT(U)-R Unit adapters. The AP(R)-R Unit requires an AC-R Unit to
supply AC power.
An Attendant Add-On DCR-60-1 CONSOLE is available with 60 station,
outside line, and or function key assignments.
J Electra Elite IPK II Terminal Feature Access, Single On/Off, or One-Touch
Keys
Keys are designated Feature Access, Single On/Off, or One-Touch
throughout this manual. The keys operate much the same, but various
limitations imposed on each type are described in this paragraph:
Feature Access Keys
Depending on the type, a Multiline Terminal can have 2, 8, 16, or 24
line keys. These highly-flexible keys can be used for station DSS/
BLF and Speed Dial.
Single On/Off Keys
Line keys may also be assigned as Single On/Off keys in System
Programming to toggle a feature on/off. This assignment has no
impact on the Feature Access keys, but the assigned features are
very specific. Call Forwarding, Call Forwarding/Do Not Disturb
Override, and Directory Dialing are examples of features available
for Single On/Off keys.