NEC ELECTRA ELITE IPK II, General Description Manual

Page: 144 / 174

Document Revision 1 Electra Elite IPK II
3 - 12 Equipment
BSU(2S)-U20 ETU This Slave 2-Base Station Unit for
Wireless DECT has connections for
two Base Stations and must be used
with the BSU(4M)-U20 ETU. This ETU
is installed in the first or second slot to
the left of the BSU(4)-U20 ETU. 2 2 Notes 1, 2
BSU(6S)-U20 ETU This Slave 6-Base Station Unit for
Wireless DECT has connections for six
Base Stations and must be used with
the BSU(4M)-U20 ETU. This ETU is
installed in the first or second slot to
the left of the BSU(4)-U20 ETU. 2 2 Notes 1, 2
CCH(4)-U( ) ETU This 4-Channel - Common Channel
Handler (CCH) for K-CCIS provides
four K-CCIS routes to coordinate
receiving common channel data from a
distant system or to coordinate
sending it to a distant system. 1 1
HUB(8)-U( ) ETU This 8-Port Switching HUB is an
optional Ethernet interface that
supports eight internet ports. Each
port has two LEDs that indicate status
and activity. One port can be a source
port, and another port can be used to
mirror source and monitor data traffic.
One ETU can be installed in slots
S1~S8 in each cabinet. This ETU
cannot be installed in a KSU that
contains EliteMail VP and IVR or CTI
and IVR systems. 1 1 Note 1
IAD(8)-U( ) ETU
configured for ESI For Megaco Station 3 14
IAD(8)-U( ) ETU
configured for
CCISoIP For CCISoIP 6 22 Note 3
PVA( )-U10 ETU as
an IP Station
(MEGACO)–MG16 For MEgaco Station 2 13
Table 3-3 Maximum System Capacities for Application Interface ETUs (Continued)
Application
Interface ETUs
Description
Maximum Capacities
Notes
Basic Port
Package
Expanded
Port Package