![NEC ELECTRA ELITE IPK II General Description Manual Download Page 154](http://html1.mh-extra.com/html/nec/electra-elite-ipk-ii/electra-elite-ipk-ii_general-description-manual_3854067154.webp)
Document Revision 1
Electra Elite IPK II
5 - 2
Hardware Specifications
S
ECTION
3
C
ABLING
R
EQUIREMENTS
AND
S
PECIFICATIONS
This section provides cabling requirements and specifications for various equipment
used in the Electra Elite IPK II system.
Figure 5-1 Connecting the ESI Using Twisted 2-Pair Cable
provides a diagram of the
KSU connected with each of the Multiline Terminals and Single Line Telephones by a
separate twisted 1-pair cable or 2-pair cable (only for Multiline Terminals).
Refer to the following tables for cabling requirements and specifications.
J
IP Terminal Loop Resistance and Cable Length
J
Table 5-4 Electra Elite/Dterm Series E Multiline Terminal Loop Resistance and
Cable Length
J
Table 5-5 Cable Connection Between the Analog Port and the Single Line
Equipment
J
Table 5-6 Cabling Requirements
Figure 5-1 Connecting the ESI Using Twisted 2-Pair Cable
Multiline Terminal
Twisted 2-Pair Cable
ESI
RJ-11
Summary of Contents for ELECTRA ELITE IPK II
