NEC ELECTRA ELITE IPK II, General Description Manual

Page: 111 / 174

Electra Elite IPK II Document Revision 1
General Description Manual 2 - 65
Dialing bins that you can allocate between System and Group Speed Dialing and a
maximum of 65 Speed Dialing Groups are available. Each extension has 10 Station
Speed Dial bins.
Each Speed Dialing bin can store a number up to 24 digits long.
When placing an Speed Dialing call, the system normally routes the call through
Trunk Group Routing or ARS (whichever is enabled). Or, the user can preselect a
specific trunk for the call. In addition, the system can optionally force System Speed
Dialing numbers to route over a specific Trunk Group. User pre-selection always
overrides the system routing.
System Bins Limited to 1000 with Speaker Key or #2 Service Code
Though there are 2000 Speed Dialing bins available in the system, once
programmed, these bins can currently only be dialed using the Directory Dial feature
(Press Directory key + SYS s use arrow keys to locate number or enter the
Speed Dial bin name + Speaker to place call.)
The Speaker key and service code #2 operations are not available for any 4-digit
Speed Dial System bin number.
DSS Console Chaining
DSS Console chaining allows an extension user with a DSS Console to chain to an
Speed Dialing number stored under a DSS Console key. The stored number dials out
(chains) to the initial call. This can, for example, simplify dialing when calling a
company with an Automated Attendant. You can program the bin for the company
number under one DSS Console key (e.g., #200) and the client’s extension number
under the other (e.g., #201). The DSS Console user presses the first key to call the
company, waits for the Automated Attendant to answer, then presses the second key
to call the client (extension 400). See Programming below for additional details.
The DSS Console user can also chain to an Speed Dialing number dialed manually,
from a Programmable Function Key or a One-Touch Key.
Storing a Flash
To enhance compatibility with connected Centrex and PBX lines, an Speed Dialing
bin can have a stored Flash command. For example, storing 9 Flash 926 5400 will
cause the system to dial 9, flash the line and then dial 926 5400. The Flash can be
stored by the user from their telephone or by the system administrator during system
programming.