NEC DT900 Series, User Manual

Page: 54 / 214

3-34
DT900/DT900S Series Phone User Guide
Figure 3.6 Handset Connection
To connect LAN cable to the phone
You will need a 10 BASE-T/100 BASE-T/TX LAN cable (Straight) to connect the
phone to your network.
1
Connect the 10 BASE-T/100 BASE-T/TX LAN cable to the LAN port on the phone and to
an open port on a device such as a Hub or PoE (Power Over Ethernet) switch on the
local area network.
2
Thread the LAN cable through the groove on the bottom of the tilt leg.
Figure 3.7 Phone/LAN Connection
I M P O R T A N T N O T E O N U S E R S E T T I N G S F O R T H E
D T 9 3 0 ( I T K - 8 T C G X ) A N D T H E D T 9 3 0 S ( I T K - 3 2 T C G S )
The DT930 (ITK-8TCGX) and the DT930S (ITK-32TCGS), use a different option for
User Settings than all of the other models documented in this manual that use Option
3
for User Settings.
The ITK-8TCGX and ITK-32TCGS phone models use
1
User Settings.
To access User Settings on the ITK-8TCGX and ITK-32TCGS
1
Press the Menu key.
2
Select the Multi settings icon.