NEC DT900 Series User Manual Download Page 38

Page: 38 / 214

D T S E R I E S P H O N E S P E C I F I C S

2-18

DT900/DT900S Series Phone User Guide

10.

Mic key

Press key to mute the microphone. The LED on this key

flashes when the microphone is muted. Press the key again to

un-mute the microphone.

11.

Menu key

Press this key to access the features and settings provided on

the local telephone menu, such as Call History, Personal

Directory or User Settings.

12.

Hold key

Press this key to place a call on hold.

13.

Transfer key

Press this key to transfer a call.

14.

Speaker key

Controls the built-in speaker which can be used for Hands

Free dialing and conversations.

The LED on this key lights when the speaker is active.

15.

Cursor pad

Use this key to navigate to various features.
The up and down keys on the cursor pad can be used to adjust

the volume of the phone.

16.

Multi (Scroll) key

Press this key to scroll to the next page of Programmable

Keys.

Summary of Contents for DT900 Series























































































































































































































Search results

Summary of Contents for DT900 Series

Reviews:

Related manuals for DT900 Series

Brands by name

Popular brands

NEC DT900 Series, User Manual

Search results

Summary of Contents for DT900 Series

Reviews:

Related manuals for DT900 Series

Brands by name

Popular brands