NEC DT900 Series, User Manual

Page: 144 / 214

E N H A N C E D P R O G R A M M A B L E K E Y S
8 -124
DT900/DT900S Series Phone User Guide
When multiple calls are being recorded, the phone keeps track of all the calls that are
being recorded and updates the state of the call recording icon based on the call
state.
S E N D T O V M K E Y
Send to Voice Mail
•
While your phone is ringing, press the Send to VM key.
The call will be sent directly to your voice mail box and the phone will stop ringing.
H O T D E S K K E Y
To log in to a Hot Desk session
1
Press the Hot Desk key to open the Hot Desk login screen.
2
Enter your user name and password and press the OK soft key to log on to the phone.
The following screen is shown:
3
Press the OK to exit the screen.
The LED on the Hot Desk key turns off when you exit this screen.
Note:
Due to system polling, it may take up to 5 minutes before your name and
extension are shown on the phone after you log in.
To log out of your Hot Desk session
1
While you are in a Hot Desk session, press the Hot Desk Key.
You are logged out off the phone, and the following screen is shown:
2
Press OK to exit the screen.
The LED on the Hot Desk key turns off when you exit this screen.
T R U N K D I A L K E Y
The Trunk Dial key is used to monitor the availability of trunks on your system, and to
place calls using specified trunks on the system.
No recording
Call terminated/
recording terminated
Off None Indicates that no call is being
recorded.
If the call you were recording is
ended, the call recording
automatically stops.
Call recording
indication is not
enabled
Off None No call recording indication is shown
on the phone, even when there is a
call recording.
Event
Record Key
LED
Icon (Call
Control
Screen)
Description