NEC DT900 Series, User Manual

Page: 127 / 214

. . . . .
U S I N G T H E M I C R O B R O W S E R
DT900/DT900S Series Phone User Guide
8 -107
S U P E R V I S E A C A L L
S U P E R V I S E A C A L L ( B A R G E - M O N I T O R )
The 3C system allows users to be granted rights to supervise an address group. If a
user has supervisor rights, they can monitor or barge into a call in progress on any
address in the group.
Selecting Supervise invokes the following XML page, allowing the user to select an
address group they have the right to supervise. Address groups that the user does
not have the right to supervise are not shown.
Note:
Supervise shows only connected calls. Held calls are not shown.
Calls made to a secondary address are shown as if they were made to the
primary address.
Conference calls cannot be supervised.
When you select Supervise, one of the following occurs:
• If you do not have Supervise privileges, the following error is shown:
• If you have Supervise privileges, the Supervise page from the web server is
shown, listing the address groups available to the user.
The Select Address Group page handles the following events:
Hard Key Features: Explanation
4-way scroll BACK key
(Redial key) Return to the Home page.
4-way scroll FORWARD key
(Directory key) No operation.
4-way scroll UP key
(Volume UP Key) No operation.
4-way scroll DOWN key
(Volume DOWN Key) No operation.
ENTER key Exit the microbrowser to the appropriate call status
screen.
Soft Key Features: Explanation
When you do not have Supervise privileges:
Back Returns to the microbrowser home page.
OK Return to the Call Control screen.
When you have Supervise privileges:
d
Move to previous menu item.
b
Move to next menu item.