1.1
To begin, connect the
included power adapter,
RJ11 telephone line cable
and USB cable to the power
port, the line port and the
USB port of base station
respectively.
1.2
Insert the included
two NiMH
rechargeable, AAA
batteries into the
battery compartment
of the handset
Place the handset
into the base for
charging
NOTE:
For the initial charge,
the battery is required to be
charged for at least 15 hours
1.3
Connect the USB cable
into your PC’s USB port.
Note:
The handset are already pre-
registered with the base unit. No more pairing
is required by the user. Please refer to the
Manual’s
Setting
for further information on
registration.
2.1
Start the Skype software on
your PC, and log into your
skype account
2.2
If this is the first time to use
the SS210 with PC, you will
be asked to allow its software
to access Skype. Select
allow this program to use
skype
and click
ok
2.3
You can optionally select Allow this
program to use Skype, but ask again in the
future option. But you should always let this
program use Skype so that you can use the
phone.
If you accidentally select the Do not allow
this program to use Skype option, open
Skype window and take these steps:
Click Tools > Options > Privacy > Manage
other program’s access to Skype.
Select USBPHONE 4SKYPE.EXE and click
Change, then re-select a proper option to let the
provided program access Skype.
1.5
Insert the provided CD into
your PC CD-ROM drive .
The setup should run
automatically and the setup
screen should appear.
If the setup does not run
automatically, please click
start
menu. Click
run
.
Enter “ D:\setup.exe” ( if D
is the letter of your CD
ROM drive)
Click
Next
all the way
down.
1.6
Click
Install
1.7
Click
Finish
to exit the
setup.
1.4
If the skype is not yet installed on your computer,
please download the skype installation file from
www.skype.com
NOTE:
Please refer to the
user manual’s Troubleshooting
section if CD autorun still fail.
NOTE:
If the driver is not
active, please double-click the
Aztech Skype Dect icon on
your Desktop
2. Using the phone
1. Installing the phone
Please proceed on next section ,
“ Using the phone “
http://www.aztech.com/prod_dect_skype.html
Connect the other end of RJ11 line cable to your
telephone wall jack.
