NEC DT900 Series, User Manual

Page: 145 / 214

. . . . .
E N H A N C E D P R O G R A M M A B L E K E Y S
DT900/DT900S Series Phone User Guide
8 -125
T R U N K P R E S E N C E L E D S
Table 8.4 Trunk Presence LEDs
To seize a trunk to place a call
•
When the Trunk Dial key LED is green to indicate that the trunk is available, press
the Trunk Dial key.
If the trunk is online and in service and there is an available line on the trunk, the
phone will allow you to dial a number to place a call. If the trunk is not available, the
phone will not enter the dialing state. You must wait for the trunk to become available,
or use another Trunk Dial key to access different trunk.
You can enter the number using the keypad
Note:
Using a Speed Dial key, or a Personal or Corporate directory to dial the
number is not supported. If you use a Speed Dial key or navigate to a Personal
or Corporate directory entry, it overrides Trunk dialing and the call is placed as
a normal outbound call to the configured number.
D N D K E Y
The DND key can be used to enable and disable Do Not Disturb on your phone. If
configured for your system, it can also serve as an indicator of DND status on the
system. The key will reflect the DND status as set by the phone, star codes, or set
using a supported client application.
D N D L E D S A N D I C O N S
Table 8.5 DND LEDs and Icons
LED Comments
LED is not
lit
Trunk not registered with the system
Trunk is not in service
Green Trunk channels available to make outside calls
Red Busy - All trunk channels are occupied.
LED
Call Control
Home Screen
Comments
LED is not
lit
No Icon DND is not enabled.
Red DND is enabled.
Note : DND may have been enabled through the DND key,
through the star codes, or using a supported client application.