NovaScale R620-LR / R620-MR Setup Guide
About the Express Setup
The following message appeared when installation has been attempted by using a hard disk drive whose size is
smaller than the specified partition size:
The specified partition size has exceeded the capacity of the hard disk. The setup
created the partition at the maximum size that can be reserved on the hard disk.
Setup will continue the process.
→
The message does not mean there is a problem. Press the
Enter
key to continue the installation.
The screen did not show image correctly while files were copied from the CD-ROM or the CD-ROM was being
checked.
→
Press the
R
key. If the problem persists after you have press the
R
key for several times, start the Express
Setup from the beginning again. If you still see the same result, contact your service agent to check the
CD-ROM drive.
Automatic installation halted asking you to enter the setup information.
→
The setup information you have configured is not correct. Enter correct values according to the message
instructions. You do not need to cancel the installation. You may be required to press the
Enter
key again at
the reboot at the end of a setup in Windows.
[OK] appears on the [Role of Computer] window.
→
When you click [Complete], in the rest of procedures, the default values of the Express Setup are
automatically selected for the installation
<Default values>
Network protocol settings
Protocol: TCP/IP [DHCP specified]
Service: Selecting sharing files for Microsoft network and printer
Client: client for Microsoft networks
Component: SNMP
Application: ESMPRO Agent
[OK] does not appear on the [Role of Computer] window.
→
[OK] does not appear if the setup information file that has been created is loaded.
→
to the
Enti
i
tem Partition.”
nstallation.
The setti
f
oup.
domain after the OS is started.
→
you have failed joining a domain, select [System] from Control Panel to make settings to join a domain.
[OK] appears only when you have moved to the [Role of Computer] window. Once you have moved
next window from the [Role of Computer] window, [OK] does not appear even if you use [Back].
re d sk area is used as the OS area though “Use Existing Partition” has been selected for “Sys
Was there any partition other than the partition to be reused (except the maintenance area)?
→
If there was no area other than the partition to be reused, the entire area is reserved for Windows i
ngs or joining a domain was made, but the server was installed as a member of a workgr
→
Workgroup settings are made in the installation. Join a
Did you use any double-byte characters in the host name?
If you use any double-byte character in a host name on Windows Server 2003, joining a domain will fail. If
6-15