NovaScale R620-LR / R620-MR Setup Guide
Preparation before Setup
Be sure to read the following description before system installation or setup.
To operate ESMPRO Agent, you need to make settings of TCP/IP and the SNMP of components associated with
TCP/IP.
TCP/IP Setting
See the Help started from the Start menu for how to set TCP/IP.
SNMP Service Setting
To install the SNMP Service:
1.
Open [Add/Remove Programs] in [Control Panel].
2.
Click [Add/Remove Windows Components].
3.
Select [Management and Monitoring Tools] in the Windows component wizard and click the [Details...]
button.
4.
Check the check box of [Simple Network Management Protocol].
5.
Click the [Next] button.
The file copy operation is started.
6.
After the file copy is finished, click the [Finish] button.
To change the settings of the SNMP Service:
1.
Double-click [Administrative Tool] in [Control Panel].
2.
Start [Services] in [Administrative Tool].
3.
Select [SNMP Service] from the service list and then [Properties] in the [Action] menu.
The "SNMP Properties" dialog box appears.
4.
Enter “public” in the [Community name] box in the [Traps] property sheet and click the [Add to list] button.
IMPORTANT:
To change the community name of traps to be received from the default “*” in the ESMPRO
Manager site, enter the same name as the community name newly set in the ESMPRO Manager
site.
To receive trap from ESMPRO Agent at the ESMPRO Manager machine, both community
names should be the same.
5.
Click the [Add...] button in [Trap destinations]. After entering the IP address of the ESMPRO Manager
machine of the send destination in the [Host name, IP or IPX address] box, click the [Add] button.
IMPORTANT:
If the IP address (or host name) of the remote ESMPRO Manager specified as the trap send
destination in the setup of the manager report (TCP/IP), the message warning the duplication
appears. The specification of the same ESMPRO Manager causes to be reported doubly.
5-3