NovaScale R620-LR / R620-MR Setup Guide
IMPORTANT:
[Complete memory dump] should be specified for writing debug
memory size is over 2 GB, specify [Kernel Memory Dump]; yo
information. However, if the installed
u cannot specify [Complete memory
dump].Quick dump function is enabled when specifying the [Complete memory dump]. If you specify
the setting other than the [Complete memory dump], the dump function for OS standard works.
the size of memory in the NovaScale/ft Server 12
GB, 2048 MB + 12 MB).
ormation to [Kernel
emory dump) to
o memory increase. Check how much free space the hard disk to which
ds
in the system with complete memory dump enabled.
be
Specify a drive which has a free space of
MB or more (If the memory size is over 2
If the memory will be expanded to larger than 2 GB, change Write Debugging Inf
Memory Dump] before expanding the memory. Size of the debugging information (m
be collected will change due t
debugging information is written has.
Perform the steps below to change your memory dump setting, if a total memory capacity excee
2GB after additional memory has been installed
If the setting is not changed, incorrect dump files may be collected.
1) Go to [Control Panel], click [System], and then click [Advanced] to open the [Startup and
Recovery] dialog box. Choose “Small memory dump” and click [OK].
2) Return the setting to “Kernel memory dump” and click [OK].
In the system failure settings, it is recommended to specify “Automatically restart.” When this option
is not selected, the operation cannot be switched to the disks that are mirrored if the system cannot
started due to a disk error.
5.
Click [Settings] in the [Performance] box.
Advanced] tab on the [Performance Options] window.
The [Performance Options] window appears.
6.
Click the [
4-29