NovaScale R620-LR / R620-MR Setup Guide
Step 9: Connecting and Configuring Options
When there are optional PCI boards or peripheral devices to connect to the main unit, power off the main unit. Then, for
connecting them, follow the instructions in “PCI board” in the separate User Guide and the manual of the devices.
TIPS:
If LAN or hard disks are added, you need to set dual configurations. For details, see “Step 6: Setting Dual LAN
Configuration” (page 4-17).
When the mounted memory is over 4 GB, specify /PAE switch to BOOT.INI file.
In order to use the entire mounted memory from the Windows system, /PAE switch needs to be specified. If it is not
specified, the Windows system only uses a part of the mounted memory.
Refer to Microsoft Product Support Services for details of specification method.
Display BOOT.INI file as described below:
1.
Right-click [My Computer] and select “Properties” to display “System Properties.”
2.
On the “Advanced” tab of “System Properties”, click the “Settings” button of “Startup and Recovery”.
3.
Click the “Edit” button of “System startup” on the displayed window.
Below shows the example of the modification.
(Before modification)
(After modification)
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows Server 2003, Enterprise" /fastdetect
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows Server 2003, Enterprise" /fastdetect /PAE
4-25