manualshive.com logo in svg

NEC Bull NovaScale R620 Series, Setup Manual, Page: 86 / 97

Share
Download
NEC Bull NovaScale R620 Series Setup Manual Download Page 86

NovaScale R620-LR / R620-MR Setup Guide 

5. 

After the system update is completed, the dialog box below will be displayed. Click [OK]. 

The system will be rebooted. Eject a CD from CD-ROM drive after the reboot process starts. 

 

 

 

 

 

IMPORTANT: 

 

If the message, 

“

Windows 

- 

FT Orphaning A disk that is part of a fault-tolerant volume can no longer be 

accessed

”

 is displayed during the update process,

 

an OS

 

stop error may occur when restarting the

 

OS. If 

an OS stop error occurs, Hold down the POWER switch, and turn off the system. In this case, the system 
will be successfully updated, however, disk mirroring is disabled. Make sure to check disk mirroring in 8. 
When “Found New Hardware” wizard appears at the reboot, click [Cancel]. If the same message appears 
again, click [Cancel] again. 

 

6. 

Reinstall GeminiEngine Control Software. 

Reinstall GeminiEngine Control Software referring to “Installing GeminiEngine Control Software” (page 6-11).  

7. 

Check disk mirroring. 

If the disk mirroring is disabled, enable the mirroring again. For the method to check disk mirroring, see “Step 6: Set 
Dual Disk Configuration.”   

IMPORTANT:  

„

 

During disk re-synchronization, do not shut down the system until the resynchronization is completed. 

„

 

If the following dialog appears, confirm that the disk is mirrored and click [Yes] to restart the system. 

 

8. 

Reboot the system. 

9. 

After the system has rebooted, log on as a user with Administrative account.   

IMPORTANT:

   

Check that the dual system is configured properly (confirm that the FT STATUS LED on the front panel of 
the server illuminates green. See page 4-7 for location of the STATUS LED).

10. 

Duplicate the LAN again for both onboard and option boards. 

Refer to “Step 6: Set Dual LAN Configuration” on page 4-21 or “DUAL LAN CONFIGURATION” in Chapter 3 of 
the separate volume of User’s Guide. Reconfigure the LAN based on the memo you have taken. 

11. 

When it is necessary for the system operation, enable [Boot Monitoring] selected in [Monitoring Configuration] of 
[Server]. See “Step 12: Enable Boot Monitoring Function” on page 4-33 for details.   

6-10

 

Summary of Contents for Bull NovaScale R620 Series


































































































Reviews:

No comments