NovaScale R620-LR / R620-MR Setup Guide
Use of Power Supply and Power Cord
WARNING
Do not handle power plugs with a wet hand.
Do not plug/unplug power cords with a wet hand. There is a risk of an electric shock.
Do not connect the ground wire to a gas pipe.
Never connect the ground wire to a gas pipe. There is a risk of a gas explosion.
CAUTION
Do not plug the cords in nonconforming outlets.
Use wall outlets with specified voltage and power type. There is a risk of a fire or current leakage.
Avoid installing the server where you may need extension cords. If the cords do not meet the power
specifications, there is a risk of overheating that could lead to a fire.
Do not plug too many cords in a single outlet.
If the rated current is exceeded, there is a risk of overheating that could lead to a fire.
Do not plug the cords insecurely.
Insert the plug firmly into an outlet. There is a risk of heat or fire due to poor contact. If dust settles on
the slots and it absorbs moisture, there is also a risk of heat or fire.
Do not use nonconforming power cords.
AC cord is to spend the thing of the next specifications:
Maximum 4.5m (14.76ft) long. Rated minimum 125V, 10A, Type SJT flexible cord.
You also have to observe the following prohibitions to prevent an electric shock or fire caused by
damage to the cords.
Do not pull on the cords.
Do not pinch the cords.
Do not bend the cords.
Keep chemicals away from the cords.
Do not twist the cords.
Do not place any object on the cords.
Do not use cords as bundled.
Do not alter, modify, or repair the cords.
Do not staple the cords.
Do not use any damaged cord. (Replace it with a new one of the same specifications. For
replacement procedures, contact your sales agent.)
1-6