manualshive.com logo in svg

NEC Bull NovaScale R620 Series, Setup Manual, Page: 65 / 97

Share
Download
NEC Bull NovaScale R620 Series Setup Manual Download Page 65

NovaScale R620-LR / R620-MR Setup Guide 

Set Recovery Console 

TIPS:  

Recovery console is used for repairing the system when the system cannot be started for some reason.

 

There

 to “Cautions for using the Windows Server 2003 

Recov

ooting” in the User’s Guide (Setup). 

 

 

U

k 

 are cautions to be taken for using the Recovery console. Refer

ery Console” of “SYSTEM REPAIR” in Chapter 6 “Troublesh

pdating the System – Applying Service Pac

IMPORTANT:

   

If you use the Windows Server 2003 CD-ROM which contains Service Pack 1 to install Windows Server 2003 on 
the server, you do not have to apply Service Pack 1 again. 

Update the system when: 

„

 

the system configuration is modified. 

„

 

the system configuration is recovered. 

„

 

the system is restored using the backup medium. 

Log on to the system with the account that has administrative authority (e.g. Administrator), and insert the 
EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server. When the [Master Control Menu] screen appears, 
click [Setup Software]. Click [Update NovaScale System] from the menu and the setup will start. Follow the instruction 
to continue the setup process. 

 

 

4-33

 

Summary of Contents for Bull NovaScale R620 Series


































































































Reviews:

No comments