manualshive.com logo in svg

NEC Bull NovaScale R620 Series, Setup Manual, Page: 90 / 97

Share
Download
NEC Bull NovaScale R620 Series Setup Manual Download Page 90

NovaScale R620-LR / R620-MR Setup Guide 

“Complete memory dump” cannot be specified to the write debug information on “Set Memory Dump” (Debug 
Information).   

→

 

“Complete memory dump” cannot be specified (not displayed) if the memory size exceeds 2 GB. Specify 
“Kernel memory dump” in this case.   

 

Cannot find the recommended value for a paging file.   

→

 

See “Size of the Partition to be Created” in “Step 1: Things Required for Setup”. 

 

Cannot specify a network path for the storage location of diagnosis information (collect log) in “Set Dr. Watson”.   

→

 

You cannot specify a network path. Specify a path to a local computer. 

The Telnet Service is not installed. 

→

Adjust the computer name to 14 characters or less, and then install the Telnet Service as explained below.

 

 

<How to install the Telnet Service> 

1.

 

Select [Run] from the Start menu. 

2.

 

Type “tlntsvr /service” in the [Open] box, and click [OK].

 

3.

 

From the Start menu, point to [Control Panel], click [Administrative Tools] and then click [Services] 
to specify whether the Telnet Service is registered.

 

Note:  Once the installation of Telnet Service is finished, you may change the computer name to 15 or more 

characters.

 

 

6-14

 

Summary of Contents for Bull NovaScale R620 Series


































































































Reviews:

No comments