NovaScale R620-LR / R620-MR Setup Guide
7.
Cautions for Express Setup are displayed. Read the
displayed contents carefully and click [Confirm].
When the setup goes ahead, your system will be rebooted
some times automatically.
Please don’t remove the EXPRESSBUILDER CD-ROM and
the Configuration diskette until other directions appear.
Confirm
There is an existing partition on
this disk. Express Setup will
destroy any data in this partition.
Do you wish to continue?
Continue
Cancel
CHECK:
If OS is installed to the disk, the message that confirms whether to
continue the installation is displayed. To continue the setup, select
[Continue].
8.
In case of using the parameter file, the Configuration Diskette is required,
so insert the FD and select [Confirm].
Insert configuration Diskette
Confirm
Back
In case of not using the parameter file, this message will not be displayed.
Go to Step 9.
CHECK:
Do not remove the floppy disk that has been set in this step until you receive instruction.
[In case of using an existing parameter]
List of the parameter files on the floppy disk that has been inserted is displayed.
(1)
Select the parameter file that is used for the installation, and select
[Use].
The confirmation dialog box will be displayed.
(2)
If you want to verify the parameter, click [Modify]. If you do not
need to verify the parameter and want to proceed to the installation,
click [Skip].
Click [Modify].
→
Go to Step 9.
Click [Skip].
→
After Step 9, go to Step 11.
[In case of setting an empty floppy disk]
(1)
Press the
A
key.
The input box will be displayed.
(2)
Enter the file name.
9.
Select the operating system to install.
Select [Windows] from the list box.
4-14