manualshive.com logo in svg

NEC Aspire S, Manual

The NEC Aspire S manual is a comprehensive guide that provides detailed instructions and information on the various functions and features of the product. Available for free download at our website, this user manual ensures that users can fully utilize their NEC Aspire S product's potential.

Share
Download
background image

Section 4: Telephones and Optional Equipment

Aspire S Hardware Manual

Section 4: Telephones and Optional Equipment

◆

4-73

4

IP Station Equipment

34-Button Aspire IPhone - BK — P/N 0890065

This keyset provides a network connector which allows it to be used 
with the VoIP feature. The 34-Button Aspire IPhone has a 3-line, 24-
character display with four interactive soft keys for intuitive feature 
access. In addition, it has 24 user-programmable function keys (with 
Dual LEDs) for one-button access to co-workers, features and out-
side lines. The telephone also provides 10 user-programmable One-
Touch (Personal Speed Dial) keys and 15 additional 

fi

xed feature 

keys.

The 34-Button Aspire IPhone has a built-in speakerphone and can 
accept optional IP adapters (PSA, ADA2). You can also assign 110-
Button DSS Consoles to these phones, but they must be on site (not networked). It provides Handsfree 
Answerback, Intercom voice-announcements. In addition, the telephone provides a built-in wall-mount 
bracket, as well as adjustable legs which allow each phone to be angled at a height which best suits the user.

✍

     

At a glance

H.323 IP Phone — P/N 780005

This UIP300 H.323 IP phone is a business IP phone in enterprise 
LAN environment and will be connected to IP PBX systems via 
RJ45 network cable.

Standard Telephone Features: 

●

Alphanumeric LCD display with 2 lines of 24 characters

●

10 LED indicators (Line 1 / Line 2

1

 / Status / Mute / Speaker 

(Headset) / 5 Function keys)

●

12 Key Dial Pad 

●

20 Speci

fi

c Keys (5 Function keys, Menu, Select, Cancel/Del, Transfer, Mute, Redial, Hold, Confer-

ence (not available with Aspire), Speaker, Line 1 and 2 keys, Volume Up and Down keys, Menu Up and 
Down keys)

●

Local Date and Time

●

Call Duration Display

●

Volume Control for Speaker, Handset, Headset, and Ringer

●

Phone Book, Speed Dial, Dial from Call Logs (30 Outgoing Calls, 30 Incoming Calls and 15 Missed Calls)

34-Button Aspire IPhone Telephone - Part Numbers 

0890065

Function Keys:

✔

Accepts 110-Button DSS:

✔

Accepts 24-Button DLS:

No

Handsfree (Speakerphone):

✔

Dual LEDs:

✔

ADA Adapter:

No

ADA2 Adapter:

✔

APA Adapter:

No

APR Adapter:

No

CTA Adapter:

No

CTU Adapter:

No

IP Adapter: 

No

PSA Adapter:

✔

1.

 Only one phone number will be assigned to this IP phone. Line 2 is not available for a gateway system.

Summary of Contents for Aspire S















































































































































































































































Reviews:

No comments

Related manuals for Aspire S

D-Link DSL-2750U Quick Start Manual preview
DSL-2750U
Brand: D-Link Pages: 2
IBM 3270 Operation Manual preview
3270
Brand: IBM Pages: 86
3Com EtherLink 3C509B Quick Manual preview
EtherLink 3C509B
Brand: 3Com Pages: 8
3Com 3CRWB6096 Quick Start Manual preview
3CRWB6096
Brand: 3Com Pages: 8
BandLuxe R500 Series User Manual preview
R500 Series
Brand: BandLuxe Pages: 67
hilscher CIFX 104 User Manual preview
CIFX 104
Brand: hilscher Pages: 154
Disc Makers Reflex10 User Manual preview
Reflex10
Brand: Disc Makers Pages: 38
Isee IGEPv2 BOARD Hardware Reference Manual preview
IGEPv2 BOARD
Brand: Isee Pages: 68
Idis DR-1204P Installation Manual preview
DR-1204P
Brand: Idis Pages: 22
XAVI Technologies Corp. X7822r User Manual preview
X7822r
Brand: XAVI Technologies Corp. Pages: 63
TP-Link Archer C7 How To Set Up preview
Archer C7
Brand: TP-Link Pages: 4
Wave Wireless Networking SPEEDLAN 4100 Installation And Operation User Manual preview
SPEEDLAN 4100
Brand: Wave Wireless Networking Pages: 167
Proxim TeraBridge 5845 Specifications preview
TeraBridge 5845
Brand: Proxim Pages: 4
AMD -K6-2/450 - MHz Processor Application Note preview
-K6-2/450 - MHz Processor
Brand: AMD Pages: 98
Genexis FiberTwist XGS2420 Installation Manual preview
FiberTwist XGS2420
Brand: Genexis Pages: 7
Analog Devices EZ-KIT LITE ADSP-2191 Manual preview
EZ-KIT LITE ADSP-2191
Brand: Analog Devices Pages: 98
Ubiquiti EdgePoint EP-R8 Quick Start Manual preview
EdgePoint EP-R8
Brand: Ubiquiti Pages: 22
EK-Quantum 3831109836897 User Manual preview
3831109836897
Brand: EK-Quantum Pages: 14

Brands by name

Popular brands

Load more brands