Section 3: Installing Extensions and Trunks
Aspila EX Hardware Manual
Section 3: Installing Extensions and Trunks
3-11
3
TESTING TELEPHONE OPERATION
The following procedure will help you determine if a problem being experienced is due to the tele-
phone or the system. Testing the operation of a system phone allows you to check the lamping of each
key, the display, and tones. Follow the procedure below to determine if the phone is operating cor-
rectly.
Key Matrix and LED Test
1. Unplug the phone.
2. While holding down dial pad digits 1, 2 and 3, plug the phone back in.
3. Hold down the 1, 2 and 3 digits for approximately 10 seconds then release them.
If the phone doesn’t show “TEST PUSH=” on the display, then repeat Steps 1-3 and
hold the keys down a few seconds longer.
4. Press any key and its Logical Name should be displayed.
The following chart indicates the Logical Name for each key.
Quitting Test Mode
1. Lift the handset and then replace it.
2. The phone returns to an idle condition.
Logical Name Table
Keys
Logical
Name
Keys
Logical
Name
KEYPAD 0 - 9
D 0 - D 9
CALL2
F 8
KEYPAD *
D *
MIC
F 9
KEYPAD #
D #
MSG
F 10
Line Keys 1 - 24
1
L 1 - L 24
DIAL
F 11
DSS Keys 1 - 10
O 1 - O 10
CLEAR
F 12
LND
F 1
CHECK
F 13
CONF
F 2
SOFT KEY 1-4
S 1 - S 4
HOLD
F 3
DIRECTORY
2
TBD
FLASH
F 4
MENU
2
TBD
DND
F 5
VOL. UP
CALL1
F 6
VOL. DOWN
SPK
F 7
1
Keys 1, 2 and 3 will also check tones.
2
34-Button Super Display telephone only.
CÔNG TY VIỄN THÔNG VIỆT PRO
Chuyên phân phối tổng đài NEC
http://vietpro.com.vn
