NEC 28i, Manual

Page: 130 / 136

0514 - Service Code Setup (Part B)
Description
Use Program 0514 - Service Code Setup (Part B) to customize the
second set of Service Codes. You can customize additional Service
Codes in Program 0511 (Service Code Setup [Part A]). You will have
to customize your Service Codes if the extension numbers you select-
ed in Program 0502 overlap the default Service Codes (100-199 and
800-899).
The following chart shows:
●
The number of each code (001 -100).
●
The code’s default assignment. For example, dialing 881 (code
001) allows users to change the Music on Hold tone.
●
The feature reference for the code.
●
The function of the Service Code.
If you change a Service Code, be sure to record your entry in the
“New” column.
Conditions
None
Default Setting
Refer to the chart below.
Program 0514 - Service Code Setup, Part B
Item Default New Feature Function
001 111 “Voice Announce Unit” Listening to the General Message
002 112 “Voice Announce Unit” Recording, listening to or erasing the General
Message
003 - Not used
004 114 “Voice Announce Unit” After calling busy extension through VAU.
After dialing code, voice prompt asks you to
leave your number for a return call.
005 ** “Directed Call Pickup” Pickup a call ringing or waiting at an extension
006 116 “Voice Announce Unit” Recording, listening to or erasing a VAU
message.
007 *8 “Voice Mail” Calling your mailbox
008 - Not used
009 890 “Voice Over” Initiating a Voice Over. This code is only
available if you disable Single Digit Dialing
code 09 in Program 0512.
010 - “Call Forwarding” Canceling a Call Forwarding, Personal
Greeting or Park and Page. This code is cur-
rently not implemented.
011 - Not used
012 - Not used
013 - Not used
4-28
4. Setting Up Flexible
System Numbering
92000hmt06.QXD 4/24/01 10:12 AM Page 28