2803 - PMS Hotel Options
Feature Cross Reference
Auto Room Scan
Flexible Check-in Messaging
Telephone Programming Instructions
To enter data for Program 2803 (PMS Hotel Options):
1. Enter the programming mode.
2. 2803 + HOLD.
Item No?
3. Enter the number of the item you want to p HOLD
Item_n:n
The previously programmed value displays.
4. Enter data (see the chart above) for the item se HOLD
Item No?
5. Repeat from step 3 to program another item.
OR
HOLD to exit.
0
(Disabled)
Flexible Check-in
Messaging
When this option is set
to ‘1’, a NAK (non-
acknowledge) mes-
sage is sent to the
PMS when the
EndOfMessage char-
acter is not received
before the expiration
of the Receive
Message Timer
(Program 2805, Item
4) allowing the mes-
sage to be resent.
Send NAK for
Receive
Message
Timeout
4
0
(Disabled)
Flexible Check-in
Messaging
Normally the system
will send Status 0 for a
checked out room.
When this option is set
to ‘1’, a Status 4
(Inspection Required)
is sent to the PMS
allowing the room to
be inspected before
checking in another
guest to the room.
Clean Room
Checkout
3
3-40
3. Programming the
Hotel/Motel Options
92000hmt06.QXD 4/24/01 10:12 AM Page 40
Summary of Contents for 28i
