1201 - DCI Setup
Telephone Programming Instructions
To enter data for Program 1201 (DCI Setup):
1. Enter the programming mode.
2. 1201 + HOLD.
Type No?
3. Enter the DCI sub-type you want to program (1-10) + HOLD
You assign DCI software ports to sub-types in Program
1202.
Item No?
4. Enter 1 to select the DCI S-Reg HOLD
Register No?
5. Enter the number of the register you want to program (65 or 66) +
HOLD
6. Enter data for the register you HOLD
Registers 65 and 66 require you to enter more than one field
of data. You see the following prompt after entering data for a
register’s last field.
Register No?
7. Repeat from step 5 to program another register.
OR
HOLD + Repeat from step 4 to select another register type.
OR
HOLD + HOLD to repeat from step 3 and select another DCI
sub-type.
OR
HOLD three times to exit.
3-30
3. Programming the
Hotel/Motel Options
92000hmt06.QXD 4/24/01 10:12 AM Page 30
Summary of Contents for 28i
