Getting Started with MAXserver Access Servers
0038
51
Flash Cards
This section describes how to use flash cards. Flash cards are
readable/writeable and can be updated to a newer software version. See the
Software Installation Guide for Xyplex Loaders for instructions. The
commands used to update flash cards are located in the Commands
Reference Guide.
You can perform the following tasks with the image file contained on the
flash card:
·
Copy the file to another card
·
Delete the files
·
Display the current status
·
Format the card
·
Load the image file
·
Terminate file updates
Loading the Image File
The DEFINE SERVER LOAD SOFTWARE command specifies the
CARD/XMOP/MOP filename that contains the software load image. You
specify this filename if CARD, XMOP, or MOP is enabled as a load protocol
for the software load image, and the load image name is different from the
default. The default software load image name for a MAXserver is
XPCSRV20. The CARD/XMOP/MOP load image filename appears in the
Server Loaddump Characteristics display shown in Figure 27.
