Getting Started with MAXserver Access Servers
0038
105
2.
Type N and press RETURN to return to the Configuration menu, or type
Y and press RETURN. The unit displays the following message:
CONFIGURATION RESET TO STORED VALUES.
(TYPE ANY KEY TO CONTINUE)
3.
Press any key. The unit returns you to the Access server Configuration
menu (Figure 28). You can then exit from the Configuration menu using
Option S or X.
Exit Saving Configuration Changes
The Exit Saving Configuration Changes option lets you exit from the
Configuration menu and store the changes that you have made.
To select this option, complete the following steps:
1.
Type S at the "Enter menu selection" prompt of the Access server
Configuration Menu (Figure 28). If you have made any changes, the
configuration menu prompts:
SAVE CHANGES AND EXIT (Y,N) [Y]?
If the unit is configured to store parameters locally, you see this
message:
UPDATING CONFIGURATION DATA; PLEASE WAIT...
If you have not made any changes, the following message displays:
NO CHANGES MADE. EXIT CONFIGURATION MENU (Y,N) [Y]?
2.
To exit from the Configuration menu, press RETURN. If you do not want
to exit from the menu, type 'N' and press RETURN. The Configuration
menu appears.
Exit Without Saving Configuration Changes
