Getting Started with MAXserver Access Servers
0038
90
because NBase-Xyplex flash cards do not function as dump
servers due to size limitation. The NVS protocol is also not
applicable to load image files.
The XMOP and MOP Protocols
The XMOP and MOP protocols look for a software load image file, a
parameter file, or a dump server. The access server first attempts to use
XMOP and then MOP. The XMOP and MOP protocols can send diagnostic
information to a dump server.
The Xyplex Maintenance Operations Protocol (XMOP) looks for the files on a
Xyplex loader on the network. See the Software Installation Guide for
Xyplex Loader Kits for more information about how to use XMOP.
The Digital Equipment Corporation Maintenance Operations Protocol (MOP)
looks for software load image and the parameter file on a Digital Equipment
Corporation host running the MOP protocol. The access server can also use
MOP to send information to a dump server. See the Software Installation
Guide for VMS Kits for information about how to configure a MOP host.
Modify Unit Configuration
The Modify Unit Configuration option is where you can:
·
Change how the unit loads its software
·
Change the name of the load image that it requests, if any
·
Change how the unit requests parameter service and dumps memory
·
Specify the total configured memory
·
Enable/disable load status messages
