Getting Started with MAXserver Access Servers
0038
16
Hardware Type: 86
Hardware Revision: 00.00.00
Rom Revision: 470000
Software Type: Access Server Level 4
Software Revision: V6.1
Protocol Type: LAT, TELNET, RLOGIN, TN3270, ARAP, SNMP, PPP, IPX,
XPRINTER
Daemon(s): LPD
Enabled Feature(s): APD, HELP, INTERNET SECURITY, IP FILTERING,
IPX FILTERING, ULI, SECURID, MENU, NESTED MENUS,
KERBEROS, RADIUS
APD Message:
AutoProtocolDetect - Begin protocol or enter 4 returns for interactive mode.
Figure 1 - Sample SHOW UNIT Display
Downloading Software
MAXservers are configured at the factory to load software from a flash card,
if one is inserted in the card slot. If a card is not present, the unit requests
software from a network load server, which can be:
·
A MAXserver that is equipped with a flash card
·
A MAXserver Manager (MAXMAN) card or Network 9000 processor
module
·
A VAX/VMS host system, from which the unit can load via DEC
Maintenance Operations Protocol (MOP)
·
A UNIX system running:
- Bootstrap protocol (BOOTP) and Trivial File Transfer Protocol
(TFTP), or
- Reverse Address Resolution Protocol (RARP) and TFTP
