Getting Started with MAXserver Access Servers
0038
97
Table 9 - Dumping Methods
Value
Description
X
Dumps its memory contents to a MAXserver
Manager when a crash occurs (you cannot
enable dumping to a flash card).
M
Dumps memory contents via the DEC MOP
loader protocol.
B
Dumps memory contents at a BOOTP host.
R
Dumps memory contents via RARP.
2.
If you choose to use a specific method(s), the configuration menu
prompts:
TOGGLE (XMOP,MOP,BOOTP,RARP)DUMP LOAD METHODS [X,M,B,R]:
3.
Select specific methods(s) by removing letters from or adding letters to
the brackets. To remove a letter, type the letter and press RETURN.
The prompt reappears, however, the letter you typed does not appear
within the brackets. To add a letter to those within the brackets, type
the letter and press RETURN. The prompt reappears and the letter you
typed is included within the brackets.
4.
When the letters within the brackets represent all the protocols you
want to use, press RETURN.
5.
If you selected the CARD, XMOP, or MOP loading method(s), proceed to
“Defining the CARD/XMOP/MOP Image Filename” to continue the
configuration. If you selected BOOTP, TFTP or RARP as your loading
method, proceed to “Defining IP Addresses” to continue the
configuration.
Defining The CARD/XMOP/MOP Image Filename
