User’s manual NAVIGON 8410
- 12 -
Before you begin
Caution!
Do not attach the cradle within the working zone of any
airbags.
Caution!
Do not fasten the cradle too close to the steering wheel or
other controls. The driver must not be obstructed in operating any car
functions.
Caution!
When installing the cradle, make sure that it will not pose a
risk in the event of an accident.
Caution!
Do not run cables directly next to safety-relevant devices and
power supplies.
Caution!
Check that the cradle is secured and adjusted properly before
each journey. The suction cup may become loose after a while.
Caution!
After installation, check all safety-relevant equipment in the
car.
Caution!
Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
Caution!
Disconnect the car charger cable from the cigarette lighter
whenever you park the car. The integrated mains adapter always
consumes a small amount of energy and could drain the car battery.
2.5
Preparing the NAVIGON 8410 for use
2.5.1
Assembling the mains adapter
Caution!
Be sure to refer to all the safety information in chapter
"Important safety information" on page 10.
The mains adapter has an operating voltage of 100~240V. Several
different plug adapters are provided. Charging the navigation device
when abroad is therefore no problem.
►
Push the correct plug adapter for the country in question into the
slot on the mains adapter until it locks in place.
2.5.2
Charging the rechargeable battery
It is possible that the rechargeable battery is not fully charged when you
unpack the navigation device. We recommend that you fully charge the
battery before using the device for the first time.
►
Connect the mains adapter to the navigation device and to a mains
socket.
