User’s manual NAVIGON 8410
Working with the map
- 63 -
The map section shown does not follow you when you move. You can
"wander" off the map.
Recalculate route: Recalculates the route. Use this function if you have
wandered far from the calculated route and would like a new route
proposal.
9.4.3
Navigation in Track mode
This mode becomes active if you have planned a route with a track for
the navigation. (Refer to "Multi-leg routes or tracks" on page 45)
After the route was shown in
Preview
mode, navigation was started.
First the navigation guides you from your current location to the
beginning of the loaded track. This navigation corresponds to the
navigation of the selected route profile. (Refer to "Navigation in Vehicle
mode" on page 56 and to "Navigation in Pedestrian mode" on page 61)
As soon as the first recorded point of the track is reached, the
navigation switches to
Track
mode.
Navigation in
Track
mode works like navigation in
Pedestrian
mode.
(Refer to "Navigation in Pedestrian mode" on page 61)
There are only a few differences:
►
The Recalculate route function is not available.
►
If more route points follow after the track, the navigation will switch
back to the originally selected mode.
9.4.4
Navigation in Offroad mode
Note:
This mode does not become active if you have selected a
pedestrian route profile for the navigation. These profiles can be
identified by the
(Pedestrian) symbol.
Nor does it become active if you are navigating along a track. (Refer to
"Navigation in Track mode" on page 63)
This mode becomes active under the following conditions:
►
You begin the navigation at a point that lies off the digitalised road
system or you move away from the digitalised road system during
navigation.
The navigation then guides you in
Offroad
mode to the point on the
digitalised road system from where you can best navigate again to
the destination.
Once you reach any point on the digitalised road system, the
navigation will be continued in
Vehicle
mode. (Refer to "Navigation
in Vehicle mode" on page 56)
