User’s manual NAVIGON Live Services
Before you begin
- 125 -
2.5.2
Selecting the right car charger cable
You have purchased a bundle comprising a navigation device and a
NAVIGON Live module:
The bundle comes with the right car charger cable. Use this cable.
You have purchased the NAVIGON Live module as an add-on to an
already existing navigation device:
The adapter in your existing charger cable may not have enough power
to supply both devices (the navigation system and the
NAVIGON Live
module) with electricity.
Caution!
Use only the car charger cable which was supplied with the
NAVIGON Live
module!
The car charger cable supplied with the
NAVIGON Live
module is
powerful enough for both devices.
2.5.3
Connecting the NAVIGON Live module to the navigation
device
►
You have updated the navigation software if applicable. (Refer to
"Updating the navigation device software" on page 124)
►
You have already secured the cradle of the navigation device in the
car.
►
The car charger cable which came with the
NAVIGON Live
module
is ready to hand.
The navigation device is switched off.
1. Connect the cable of the
NAVIGON Live
module to the USB socket
of the navigation device used for the power supply.
Caution!
Even if your navigation system could be supplied with
electricity via the cradle, you must connect the cable of the
NAVIGON Live
module directly to the device. If not, the module will not
work.
2. Connect the car charger cable which came with the
NAVIGON Live
module to the vehicle's cigarette lighter and to the mini-USB socket
of the module.
The module's
NAVIGON
logo lights up orange as soon as it is
supplied with electricity. At the same time it supplies power to the
connected navigation device.
3. Insert the navigation device into the cradle.
4. Make sure that the
NAVIGON Live
module lies on the dashboard
so that mobile radio reception is as good as possible.
