User’s manual NAVIGON 8410
- 90 -
Handsfree Module
Note:
In this case the phone book and recent calls are only available
when the phone in question is connected. For details of how to import
the phone book and recent calls refer to the chapters "Import Phone
Book" on page 92 and "Import recent calls" on page 93.
Searching for devices
1. Make sure that the Bluetooth function is activated on both the
mobile phone and the
NAVIGON 8410
. If you want to set up a
connection to a headset, the headset must be switched on.
Additional information can be found in the manual issued for the
headset.
2. Tap in the
H
ANDSFREE
M
ODULE
window on the
(Trusted
Devices) button.
The
T
RUSTED
D
EVICES
window opens.
3. Tap
on
Options > Search for Devices.
The navigation device starts the search for Bluetooth devices and
lists all the devices it recognises in the
D
ISCOVERED
D
EVICES
window. The symbol to the left of the device name indicates
whether the device is a mobile phone or a headset.
Pairing with a device
4. Tap in the
D
ISCOVERED
D
EVICES
window on the
(Connect)
button or on the name of the device you want to connect to.
►
If pairings already exist with three mobile phones or a headset, you
will now be prompted to delete a device from the
T
RUSTED
D
EVICES
list. (Refer to "Deleting a device" on page 92)
5. The navigation device prompts you to enter a password.
►
If you are setting up a connection to a mobile phone, enter a
password (1–16 digits) in the Key box and tap on
(OK). Then
enter the same password on the mobile phone.
►
If you are setting up a connection to a headset, enter the headset
password. This password and additional information about pairing
can be found in the manual issued for the headset.
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the
T
RUSTED
D
EVICES
list. (Green symbol.)
