User’s manual NAVIGON 8410
- 24 -
Voice Command
The list closes once an entry has been selected. You are now
finished with entering the city.
►
Tap on
(Close List) in order to close the list without selecting
an entry.
Note:
The list opens automatically as soon as it contains only 4 or less
entries.
5.3
Options
Some windows offer options that lead to more functions.
A description of all available options can be found in the chapter
"Options" on page 50.
5.4
Menus
Some buttons have menus which open when activated.
►
Tap on a menu point to execute its function.
If you would like to quit the options list without selecting a function, tap
on the button you used to open the menu.
6 Voice
Command
Note:
The
Voice Command
function is not available in every language.
For languages in which this function is available, the
N
AVIGATION
button
is shown in the Voice Command window. For languages which are not
supported, the Voice Command button is replaced by the Show Map
button.
Many functions of your navigation device can be called up conveniently
by voice commands.
6.1
Activating the voice commands function
The voice commands function is automatically active in many windows.
This applies in particular to windows in which you are expected to
provide an answer, for example when there is a new traffic message
concerning your route.
In the
N
AVIGATION
window and on the map you can activate the voice
commands function by drawing your finger quickly over the screen in a
diagonal line.
