Nautel VS1, Operation And Maintenance Manual

Page: 187 / 224

VS1 Operations and Maintenance Manual Operating the transmitter
Issue 3.1 2013-10-01 Page 2-159
Playlist
The
Playlist
tab (see Figure 2.143 ) displays the audio files and sequence that currently make up the
playlist. Only audio files that are supported (e.g., .wav or .mp3 files) will be played. For .mp3 files,
using files with bit rates equal to or less than 96 kbps achieves best audio results. Also, you must
activate a preset that has
Playlist
selected in the
Main Audio
->
Secondary Digital
->
Secondary
Source
in the Presets menu. There are three sections in the Playlist tab - Playlists, Playlist Contents
and Available Files on USB.
Figure 2.143: Managing Playlist Files
The
Playlists
section is used for adding (
Add
button) and deleting (
Delete
button) playlists.
The
Playlist Contents
section is used for inserting jumps (
Insert JMP
button) and deleting playlist
contents (
Delete
button). The
Insert JMP
button allows the user to set up a playlist that can jump to
an item in another playlist. You can drag files up and down the
Playlist Contents
list and you can
drag files from the
Available Files on USB
list to the
Playlist Contents
list.
Note:
You should not change an active (playing) playlist nor should you attempt to delete or move a song
that is currently playing. To make changes to the playlist, the audio player must be off (inactive) -
or at least not being used as the active preset’s source.