Nautel VS1, Operation And Maintenance Manual, Page: 120 / 224

VS1 Operations and Maintenance Manual Operating the transmitter
Page 2-92 Issue 3.1 2013-10-01
System Settings - AUI
This section includes the following topics:
• Resetting the AUI or Exciter - see page 2-94
• Upgrading Software - see page 2-94
• Calibrating Audio Inputs - see page 2-96
– Calibrating Audio - Using the AUI - see page 2-96
– Calibrating Audio - Using the Front Panel - see page 2-97
• IBOC settings - VSHD only - see page 2-98
• Calibrating Exciter TCXO - see page 2-99
– Calibrating Exciter TCXO - Using the AUI - see page 2-99
– Calibrating Exciter TCXO - Using the front panel - see page 2-100
From the remote AUI’s
System Settings
page via the Main Menu options (see Figure 2.81 ), you can
reboot the remote AUI or the exciter, perform software upgrades to the transmitter, calibrate the
exciter’s TCXO, audio inputs and IBOC settings.
Note:
The front panel UI also has a
System Settings
menu, which contains similar functions to the AUI
(e.g., calbrating the exciter’s TCXO and calibrating audio inputs), and additional settings that
are described in
System Settings - Front Panel UI - see page 2-101 . Unless otherwise noted, the
following functions are only available via a LAN connection to the remote AUI.