VS1 Operations and Maintenance Manual
Operating the transmitter
Page 2-144
Issue 3.1 2013-10-01
Configuring remote inputs and outputs
You can configure your remote input/output interface for the transmitter using the remote AUI (see
Remote I/O Settings - Using the AUI
) or using the local front panel display (see
Remote I/O Settings
- Using the Front Panel Display on page 2-151
).
Refer also to the VS1 Pre-installation Manual for information on remote inputs and outputs and their
factory default settings.
Remote I/O Settings - Using the AUI
To view the
Remote I/O
page (see
Figure 2.129
), select
Remote I/O
from the
Menu
options. Click
X
in the upper, right corner to close this page and return to the home page.
Figure 2.129: Remote I/O Page (Inputs Tab shown)
Click the
Inputs
(see
Digital inputs - AUI on page 2-145
) or
Outputs
(see
Digital outputs - AUI on
page 2-147
) tab to view or edit detail on the digital inputs or outputs.
Note:
This function is only available via remote connection to the AUI. However, you can view the
status of remote inputs and outputs on the front panel display.
Summary of Contents for VS1
