Nautel VS1, Operation And Maintenance Manual, Page: 143 / 224

VS1 Operations and Maintenance Manual Operating the transmitter
Issue 3.1 2013-10-01 Page 2-115
Email Configuration
Email configuration (see Figure 2.99 ) allows you to configure email parameters (e.g., email server and
port number), and is required if the notification feature is used (see Notifications on page 2-116 ).
Figure 2.99: Email Configuration Page
To configure the email feature, perform the following steps:
1. Enter the four fields, noting the following:
•
Email Server
: In order to enter a server name (e.g., mail.nautel.com), at least one
nameserver IP address must be entered (see Network Setup on page 2-111 ).
•
Port Number
: This logical connection end point uses a number to identify the type of
process to which an internet or other network message is to be forwarded to when it
arrives at a server. Typically, this is set to 25 for unencrypted SMTP systems and 843 for
encrypted email.
Note:
Nautel recommends that the following settings be entered/vetted by a qualified Network
Administrator.
All IP addresses
shown are for
reference
purposes only