Nautel VS1, Operation And Maintenance Manual

Page: 108 / 224

VS1 Operations and Maintenance Manual Operating the transmitter
Page 2-80 Issue 3.1 2013-10-01
•
Enable:
Select ON or OFF.
•
Data Source:
Select Internal, Ext. ASCII, Ext. UECP, ASCII Over IP, or UECP Over IP.
•
Baud Rate:
Select 150 bps, 300 bps, 600 bps, 1.2 kbps, 2.4 kbps, 4.8 kbps, 9.6 kbps,
19.2 kbps, 38.4 kbps, 57.6 kbps or 115.2 kbps.
•
RDS Level:
Select a value between 0 and 10%.
•
RDS Phase:
Select a value between 0 and 360 degrees.
•
PS Name:
Enter an 8-character name. Use the right and left arrows to move the cursor to the
desired character. Use the up and down arrows to edit the character.
•
PI Code:
Enter a hex value between 0x0000 and 0xFFFF.
•
Program Type:
Select the program type from various choices.
•
Traffic Flags:
Select None, TA/TP, TP or TA.
•
Music/Speech:
Select Music or Speech.
•
DI Code:
See Figure 2.65 on page 2-81 .
•
AF Data:
See Figure 2.66 on page 2-81 .
•
Local Echo:
Select ON or OFF.
Note:
For an ASCII Over IP data source, RDS information should be sent to the IP address of the
VS1, port 7005.
Note:
For title/artist functionality, the VS1 supports the radio text (RT) data type, using the UECP
or Ext. ASCII data source. PS scrolling is not currently supported.