Nautel VS1, Operation And Maintenance Manual

Page: 138 / 224

VS1 Operations and Maintenance Manual Operating the transmitter
Page 2-110 Issue 3.1 2013-10-01
•
Notifications:
Allows configuration of email notifications to be sent for user-selected alarm
occurrences (see Notifications on page 2-116 ).
•
Exgine Settings
: Allows you to set signal parameters and determine IP information for use
with the Exgine option (VSHD only). See Configuring Exgine Settings - VSHD exciter only
on page 2-118 .
•
SNMP Configuration:
Allows configuration of SNMP settings (see SNMP configuration on
page 2-120 ).
•
Capture Critical Parameters:
Allows the user to capture critical parameter data for the
transmitter’s current state and paste it to a spreadsheet program (see Critical parameters on
page 2-122 ).
•
External 10MHz:
Allows for confirmation of the use of an external 10 MHz reference (see
External 10MHz on page 2-123 ).
•
Spectrum Mask
: Allows users to select the appropriate FM mask standard (FCC, ETSI or
None) being used by the analyzer (see Spectrum mask on page 2-125 ).
•
Time Setup:
Allows for adjustment of the AUI clock’s time, date, region and time zone (see
Setting the Clock on page 2-125 ).
•
NTP Servers:
Allows for configuration and management of NTP servers (see NTP servers
on page 2-128 ). NTP must be enabled to allow editing; this can only be done using the front
panel UI (see Enabling NTP on page 2-128 ).
• Nautel Phone Home: Provides a unique diagonostic tool that leverages stored transmitter
information to assist in the analysis of the cause of specific alarms (see
Nautel Phone Home
on page 2-130 ).
•
Call Sign/ID:
You can set a name that identifies the transmitter on the AUI (see Setting call
sign/ID on page 2-131 ).
•
Audio Low Thresholds:
Provides adjustable thresholds for the main audio source and SCA
audio source (configurable timeout and trip level). See Audio low thresholds on page 2-132 .
Note:
The front panel UI also has a
User Settings
menu, which contains similar functions to the AUI
(e.g., network setup, external 10 MHz and time setup), and additional settings that are described
in
User Settings - Front Panel UI on page 2-133 . Unless otherwise noted, the following functions
are only available via a LAN connection to the remote AUI.