© by N&W GLOBAL VENDING S.p.A.
43
05-2015 3625 01
Chapter 3
MaINTENaNCE
The intactness of the machine and its compliance with
the standards of relevant installations must be checked
by skilled personnel at least once a year.
Never forget to power off the machine before car
-
rying out any maintenance operation requiring the
disassembly of components.
The operations described here below shall be performed
by specialised personnel only, trained on the use of the
machine and informed on the specific risks in terms of
electric safety and hygiene rules.
The equipment has a microswitch intended to discon
-
nect the electric installation as soon as the slide-in
interface is extracted.
as soon as the interface is extracted, you are not
allowed to access any live part.
only the parts protected by covers and signalled by
the following symbol remain live inside the ma-
chine.
before removing these covers, detach the power
supply cable from the mains.
To power on the equipment when the slide-in interface
is extracted, just insert the key into the slot of the main
switch.
If you power on the equipment when the glass-
fronts are open, lighting is turned on: never stare at
any source of light.
You can close the slide-in interface only after having
removed the key from the main switch.
Melodia
E
2 3
6
9
1
4 5
7 8
0 C
7
8
9
10
11
12
2
3
4
5
6
1
Fig. 23
1- Cabinet base
2- Housing of the product dispensing compartment
3- Cooling unit evaporator
4- Cold air distribution grid
5- Tray guides
6- Slide-in user interface
7- CPU board
8- Glassfront lighting board
9- Housing of the coin mechanism
10- Photocells
11- Electric panel
12- Main switch
